Mitsubishi Outlander: Keyless entry system
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Locking and unlocking / Keyless operation system / Keyless entry system
Press the remote control switch, and all doors and the rear hatch will be locked or unlocked as desired.
It is also possible to operate the door outside rear-view mirrors.
1- LOCK 
switch
2- UNLOCK 
switch
3- Indication lamp
- To lock
- To unlock
- Operation of the Dead Lock System
- Operation of the outside rear-view mirrors (Vehicles equipped with mirror retractor switch)
- Setting of door and rear hatch unlock function (vehicles equipped with the central door lock switch)
- Procedure for replacing the remote control switch battery
READ NEXT:
To lock
Press the LOCK switch (1). All the doors and rear hatch will be locked. The turn-signal
lamps will blink once.
Note
► With a vehicle that has a Dead Lock System, pressing the LOCK switch (1
To unlock
Press the UNLOCK switch (2). All the doors and the rear hatch will be unlocked.
If the front room lamp switch (if so equipped) is in the “DOOR” position or the
rear room lamp switch (except fo
Operation of the Dead Lock System
In a vehicle that has a Dead Lock System, it is possible to set the Dead Lock
System using the remote controller. (Refer to “Dead Lock System”.)
SEE MORE:
Information screen display
Brake warning display
When “RELEASE PARKING BRAKE” is displayed This warning is displayed if you drive
with the parking brake still applied. The warning lamp in the instrument cluster
only illuminates when the parking brake is applied.
CAUTION:
● If a vehicle is driven without rel
Brake warning lamp
This lamp illuminates when the ignition switch is turned to the “ON” position,
and goes off after a few seconds.
Always make sure that the lamp goes off before driving.
With the ignition switch in the “ON” position, the brake warning lamp illuminates
under the following conditions: &
© 2010-2025 Copyright www.mioutlander.com
