Mitsubishi Outlander: Operation of the Dead Lock System
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Locking and unlocking / Keyless operation system / Keyless entry system / Operation of the Dead Lock System
In a vehicle that has a Dead Lock System, it is possible to set the Dead Lock System using the remote controller. (Refer to “Dead Lock System”.)
READ NEXT:
Operation of the outside rear-view mirrors (Vehicles equipped with mirror retractor
switch)
To fold
Within 30 seconds of locking the doors and rear hatch using the LOCK switch (1),
press the LOCK switch twice rapidly to fold the outside rear-view mirrors.
To extend
Within 30 seconds of
Setting of door and rear hatch unlock function (vehicles equipped with the central
door lock switch)
The door and rear hatch unlock function can be set to the following two conditions.
Each time the door and rear hatch unlock function is set, a chime will sound
to tell you the condition of the doo
Procedure for replacing the remote control switch battery
1. Before replacing the battery, remove static electricity from your body by
touching a metal grounded object.
2. With the MITSUBISHI mark facing you, insert the cloth-covered tip of a straight
b
SEE MORE:
Floor console box
Type 1
Upper and lower boxes are located inside the floor console box.
The floor console box can also be used as an armrest.
1- Upper box
2- Lower box
To open the upper box, lift the right release lever (A) and raise the lid.
To open the lower box, lift the left release lever (B) and raise t
Parking
To park the vehicle, fully engage the parking brake, and then move the gearshift
lever to 1st or “R” (Reverse) position.
Parking on a hill
To prevent the vehicle from rolling, follow these procedures:
Parking on a downhill
Turn the front wheels toward the kerb and move the vehicle forward
© 2010-2026 Copyright www.mioutlander.com
