Mitsubishi Outlander: Multi-information meter switch
Each time the multi-information meter switch is operated, a sound is emitted
and the multi-information display changes between information such as warnings,
odometer, tripmeter, service reminder, engine coolant temperature (Type 1), average
and momentary fuel consumption, driving range, average speed, and ACD (Active centre
differential system) operation display.
It is also possible to change elements such as the language and units used on
the multi-information display by operating the multi-information meter switch.

READ NEXT:
If you press the multi-information meter switch and return from the warning display
screen to the previous screen, the mark is displayed.
Refer to “To return to the screen displayed before the
Each time you lightly press the multi-information meter switch, the display screen
switches in the following order.
1- Odometer (Type 1)/Tripmeter
2- Odometer (Type 1)/Tripmeter
3- Service re
Each time you lightly press the multi-information meter switch, the display screen
switches.
Odometer/Tripmeter → Odometer/Tripmeter
→ Service reminder → Redisplay of a
warnin
SEE MORE:
The electronic immobilizer has been designed to significantly reduce the possibility
of vehicle theft.
The purpose of the system is to immobilize the vehicle if an invalid start is
attempted. A valid start attempt can only be achieved (subject to certain conditions)
using a keyless operation
When the engine is overheating, the information screen in the multi-information
display will be interrupted and the engine coolant temperature warning display will
appear. Also will blink.
If this occurs, take the following corrective measures:
1. Stop the vehicle in a safe place.
2. Check w
© 2010-2025 Copyright www.mioutlander.com
