Mitsubishi Outlander: Odometer/Tripmeter
Each time you lightly press the multi-information meter switch, the display screen switches.
Odometer/Tripmeter 
→ Odometer/Tripmeter
→ Service reminder → Redisplay of a
warning display screen → Odometer/Tripmeter
Odometer
The odometer indicates the distance travelled.
Tripmeter
The tripmeter indicates the distance travelled between two points.
Example usage of tripmeter and tripmeter
It is possible to measure two currently
travelled distances, from home using tripmeter
and from a particular point on the
way using tripmeter .
To reset the tripmeter
To return the display to 0, hold down the multi-information meter switch for about 2 seconds or more. Only the currently displayed value will be reset.
Example
If tripmeter is displayed, only
tripmeter will be reset.
Note
► If there is no warning display, the switching sequence is: Odometer/Tripmeter
→ Odometer/ Tripmeter → Service reminder → Odometer/Tripmeter .
► Both tripmeters and
can count up to 9999.9 km (9999.9 miles).
When a tripmeter goes past 9999.9 km (9999.9 miles), it returns to 0.0 km (0.0 miles).
► When disconnecting the battery terminal, the memories of tripmeter
display and display
are erased, and their displays return
to 0.0 km (0.0 miles).
READ NEXT:
Service reminder
This displays the distance and number of months until the next periodic inspection.
Refer to “Service reminder”.
Interrupt display screen (when the ignition switch is “OFF”)
When there is information to be announced, such as lamp reminders, the buzzer
sounds and the multiinformation display switches to the warning display screen.
Refer to the appropriate page and take
Door ajar warning display screen (when the ignition switch is “OFF”)
If any of the doors or the rear hatch is not completely closed, this displays
the open door or rear hatch.
1- Doors and rear hatch are closed
2- Doors or rear hatch is open
SEE MORE:
Supplemental restraint system (SRS)-airbag
The information for SRS airbags includes important information concerning the
driver’s and front passenger’s airbags, the side airbags and the curtain airbags.
The SRS airbags are designed to supplement the primary protection of the driver
and front passenger side seat belt systems by provi
Welcome light
This function turns on the position and tail lamps for about 30 seconds after
the UNLOCK switch (A) on the remote control transmitter is pressed when the combination
headlamps and dipper switch is in the “OFF” or “AUTO” position (for vehicles equipped
with the automatic lamp control).
