Mitsubishi Outlander: Operating range of the keyless operation system

Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Locking and unlocking / Keyless operation system / Operating range of the keyless operation system

If you are carrying the keyless operation key, enter the operating range of the keyless operation system, and operate a door or rear hatch switch, the ID code for your key is verified.

You can only lock and unlock the doors and rear hatch, and start the engine if the ID codes of your keyless operation key and the vehicle match.

Note

Note

► If the keyless operation key battery is wearing out or there are strong electromagnetic waves or noise present, the operating range may become smaller and operation may become unstable.

SEE MORE:

Changing the detection areas

The detection areas can be changed as follows: Vehicles with a towing bar While the operation of the system is stopped at the “SONAR” switch, push the “SONAR” switch approximately 3 seconds or more, and release it. The buzzer sounds twice to indicate that the detection area has been ch

Interrupt display screen (when the ignition switch or the operation mode is OFF)

When there is information to be announced, such as lamp reminders, the buzzer sounds and the multiinformation display switches to the warning display screen. Refer to the appropriate page and take the necessary measures. When the cause of the warning display is eliminated, the warning display g

Mitsubishi Outlander: Operating range of the keyless operation system

READ NEXT:

Operating range for locking and unlocking the doors and rear hatch

Operating range for starting the engine

To operate using the keyless operation function

SEE MORE:

Changing the detection areas

Interrupt display screen (when the ignition switch or the operation mode is OFF)