Mitsubishi Outlander: To operate using the keyless operation function
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Locking and unlocking / Keyless operation system / To operate using the keyless operation function
READ NEXT:
Locking the doors and rear hatch
When you are carrying the keyless operation key, if you press the driver’s or
front passenger’s door lock/unlock switch (A), or the rear hatch LOCK switch (B)
within the operating range, the d
Unlocking the doors and rear hatch
When you are carrying the keyless operation key, if you press the driver’s or
front passenger’s door lock/unlock switch (A), or the rear hatch OPEN switch (B)
within the operating range, all t
Operation of the Dead Lock System
With a vehicle that has a Dead Lock System, it is possible to set the Dead Lock
System using the driver’s or front passenger’s door lock/unlock switch, or the rear
hatch LOCK switch. (Refer to
SEE MORE:
Wheel condition
1- Location of tread wear indicator 2- Tread wear indicator
Check the tyres for cuts, cracks and other damage. Replace the tyres if there
are deep cuts or cracks. Also check each tyre for pieces of metal or pebbles.
The use of worn tyres can be very dangerous because of the greater chance of
How to enter PTYs in the memory
As many as 6 PTYs can be entered in the memory.
Follow the steps described below.
1. Press either the TUNE/SEEK button (5 or 6) to tune the PTY to be entered in
the memory. 2. Press one of the memory select buttons (7) for about 2 seconds
or longer. The sound will be momentarily interrupted wh
© 2010-2025 Copyright www.mioutlander.com
