Mitsubishi Outlander: Other interrupt displays (when the ignition switch is “ON”)
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Instruments and controls / Indication lamp, warning lamp, and information screen display list / Information screen display list / Other interrupt displays (when the ignition switch is “ON”)
The operation status of each system is displayed on the information screen. Refer to the appropriate page for the system for further details.
This informs you that a periodic inspection is due.
The setting for rest interval can be changed.
READ NEXT:
Turn-signal indication lamps/ Hazard warning indication lamps
These indication lamps blink in the following situations.
► When the turn-signal lever is moved to activate a turn-signal lamp.
Refer to “Turn-signal lever”.
► When the hazard war
High-beam indication lamp
This indication lamp illuminates when the high-beam is used.
SEE MORE:
Warning lamp
The ABS warning lamp should illuminate when the ignition switch is turned ”ON”,
and should go off in a few seconds.
CAUTION
If the warning lamp stays on or does not illuminate when you start the
vehicle, it indicates that the ABS is not functioning and that only the standard
brake syst
What to do if the following occur with the Twin Clutch SST
If there is a malfunction in the Twin Clutch SST or engine electronic control
module, the following may occur.
► Twin Clutch SST does not shift.
► Vehicle cannot move.
► Twin Clutch SST acceleration is slow.
► Vehicle does not creep.
► “Shift shock” is large.
© 2010-2026 Copyright www.mioutlander.com
