Mitsubishi Outlander: Outside temperature display screen
Mitsubishi ASX / Mitsubishi ASX Owner's Manual / Instruments and controls / Multi-information display / Outside temperature display screen
This shows the temperature outside the vehicle.
NOTE
• The display setting can be changed to the preferred units (°C or °F).
Refer to “Changing the function settings (when the ignition switch or the operation mode is ON)”.
• Depending on factors such as the driving conditions, the displayed temperature may vary from the actual outside temperature.
READ NEXT:
Fuel remaining display screen
This displays the amount of fuel remaining.
CAUTION
• For petrol-powered vehicles, do not run out of fuel, or the catalytic converter
may be adversely affected.
If the warning display appear
Service reminder
Displays the approximate time until the next periodic inspection recommended
by MITSUBISHI MOTORS. “---” is displayed when the inspection time has arrived.
NOTE
• Depending on the vehicle s
Door ajar warning display screen (when the ignition switch or the operation
mode
is ON)
If any of the doors or the tailgate is not completely closed, this displays the
open door or tailgate.
If the vehicle speed exceeds approximately 8 km/h (5 mph) while a door is ajar,
a buzzer s
SEE MORE:
Volume and tone control panel
1- PWR (On-Off) switch
2- VOL (Volume control) knob
3- Display
4- SOUND (Sound control) switch
To adjust the volume
VOL (Volume control)
Turn the VOL knob clockwise to increase the volume;
anticlockwise to decrease the volume.
To adjust the tone
Press the SOUND switch to select: SUB PUNCH
Using the MIVEC engine
The MIVEC engine automatically switches its intake- valve control between a low-speed
mode and a high-speed mode in accordance with driving conditions for maximum engine
performance.
NOTE
• To protect the engine, the high-speed mode may not be selected while the engine
coolant temperature
© 2010-2025 Copyright www.mioutlander.com
