Mitsubishi Outlander: Parking
To park the vehicle, fully engage the parking brake, and then move the gearshift lever to 1st or “R” (Reverse) position for vehicles equipped with M/T, or set the selector lever (CVT) or gearshift lever (Twin Clutch SST) to “P” (PARK) position for vehicles equipped with a CVT or Twin Clutch SST.
READ NEXT:
Parking on a hill
To prevent the vehicle from rolling, follow these procedures:
Parking on a downhill slope
Turn the front wheels towards the kerb and move the vehicle forward until the
kerb side wheel gently touch
Parking with the engine running
Never leave the engine running while you take a short sleep/rest, or you open
or close a gate or garage door, etc. Also, never leave the engine running in a closed
or poorly ventilated place.
Wa
Steering wheel height adjustment
1. Release the tilt lock lever while holding the steering wheel up.
2. Adjust the steering wheel to the desired height.
3. Securely lock the steering wheel by pulling the tilt lock lever fully upwar
SEE MORE:
Type 3
The emergency key fits all locks.
1- Keyless operation key
(with electronic immobilizer and keyless entry system function) 2- Emergency key
3- Key number tag
Warning
► When taking a key on flights, do not press any switches on the key while
on the plane. If a switch is pressed on the
To check the fluid level
The fluid level must be between the “MAX” and “MIN” marks on the reservoir.
The fluid level is monitored by a float. When the brake fluid level falls below
the “MIN” mark, the brake fluid warning lamp lights up.
The fluid level falls slightly with wear of the brake pads, but this d
© 2010-2025 Copyright www.mioutlander.com
