Mitsubishi Outlander: Petrol-powered vehicles with turbocharge
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Maintenance / Engine oil / Selection of engine oil / Petrol-powered vehicles with turbocharge
► Select engine oil of the proper SAE viscosity number according to the atmospheric temperature.
SAE 5W-30, 0W-30 and 0W-40 engine oil can only be used if it meets ACEA A3/B3, A3/B4 or A5/B5 and API SM or higher specifications.
► SAE 0W-30 and 0W-40 engine oil are recommended to use to improve engine startability on a very cold weather condition.
► Use engine oil conforming to the following classification: • API classification:
“For service SM” or higher
• ILSAC certificated oil
• ACEA classification:
“For service A1/B1, A3/B3, A3/B4 or A5/B5”
Note
► Use of additives is not recommended since they may reduce the effectiveness of additives already included in the engine oil. It may result in failure of the mechanical assembly.
READ NEXT:
Diesel-powered vehicles
► Select engine oil of the proper SAE viscosity number according to the atmospheric
temperature.
► Use engine oil conforming to the following classification: • ACEA classification:
To check the coolant level
A transparent coolant reserve tank (A) is located in the engine compartment.
The coolant level in this tank should be kept between the “LOW” and “FULL” marks
when measured while the engine
SEE MORE:
Front console box
To open, push the lid.
Upper box
Note
► The Auxiliary Audio connector (RCA) or the Auxiliary Video connector (RCA)
is located in the front console box (if so equipped). For details, refer to “To
use the external audio input function”.
Lower box
Note
► Do not use the f
To lock without using the key
Set the inside lock knob (1) to the locked position, and close the door (2).
Note
► The driver’s door cannot be locked using the inside lock knob while the driver’s
door is opened.
© 2010-2025 Copyright www.mioutlander.com
