Mitsubishi Outlander: Power steering fluid
Check the fluid level in the reservoir while the engine is idling.
Unscrew the reservoir cap; the level in this tank should be kept between the “MAX” and “MIN” lines.
Use “ATF DEXRON II”.
READ NEXT:
Clutch fluid
Petrol-powered vehicle
To check the clutch fluid
To check the clutch fluid The clutch fluid in the master cylinder should be checked
when performing other underhood services. In addition, the syst
Washer fluid
Check the washer fluid level in the container. If the level is low, replenish
as required.
NOTE
The washer fluid container serves the windscreen, rear window, and headlamps
(if so equipped).
During cold weather
To ensure proper operation of the washers at low temperatures, use a fluid containing
an anti–freezing agent.
SEE MORE:
If the DPF warning display and check engine warning lamp illuminate at the same
time during vehicle operation
If an abnormal condition occurs in the DPF system, the DPF warning display and
check engine warning lamp illuminate. Have the system inspected at a MITSUBISHI
MOTORS Authorized Service Point.
Caution
► Continuing to drive with the DPF warning display and check engine warning
lamp il
Changing the temperature unit
The display unit for temperature can be switched.
1. Press and hold the multi-information meter switch for about 2 seconds or more
to switch from the setting mode screen to the menu screen. Refer to “Changing the
function settings (when the ignition switch is “ON”)”.
2. Lightly press t
© 2010-2026 Copyright www.mioutlander.com
