Mitsubishi Outlander: Power type (driver’s side only)
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Seat and seat belts / Front seat / To recline the seatback / Power type (driver’s side only)
Adjust the seatback angle by operating the switch as indicated by the arrows.
1- To move to forward direction
2- To recline rearward
Note
► To prevent the battery from running down, operate the power type seat with the engine running.
READ NEXT:
Manual type
Operate the lever repeatedly to raise or lower the seat.
1- Raise
2- Lower
Power type
To adjust the seat height, operate the switch as indicated by arrows.
Note
► To prevent the battery from running down, operate the power type seat with
the engine running.
1- To move the
SEE MORE:
Uphill/downhill driving
DRIVING UPHILL
The Twin Clutch SST may not upshift to a higher shift position if the computer
determines the current speed cannot be maintained once a higher shift position is
engaged.
For smoother vehicle performance, if you release the throttle while climbing
a steep grade, the Twin Clutch
Inspection and maintenance followingrough road operation
After operating the vehicle in rough road conditions, be sure to perform the
following inspection and maintenance procedures:
● Check that the vehicle has not been damaged by rocks, gravel, etc.
● Carefully wash the vehicle with water.
Drive the vehicle slowly while lightly depressi
© 2010-2025 Copyright www.mioutlander.com
