Mitsubishi Outlander: Rear window demister switch
The rear window demister switch can be operated when the engine is running.
Push the switch to turn on the rear window demister.
It will be turned off automatically in about 20 minutes. To turn off the demister within about 20 minutes, push the switch again.
The indication lamp (A) will illuminate while the demister is on.
Note
► If your vehicle is equipped with heated mirrors, when the rear window demister
switch is pressed, the outside rear-view mirrors are defogged or defrosted. Refer
to “Heated mirror”.
► The demister switch is not to melt snow but to clear mist. Remove snow before
use of the demister switch.
► When cleaning the inside of the rear window, use a soft cloth and wipe gently
along the heater wires, being careful not to damage the wires.
► Do not allow objects to touch the inside of the rear window glass, damaged or
broken wires may result.
READ NEXT:
Horn switch
Press the steering wheel on or around the
mark.
Economical driving
For economical driving, there are some technical requirements that have to be
met. The prerequisite for low fuel consumption is a properly adjusted engine.
In order to achieve longer life of the ve
SEE MORE:
To play USB memory device tracks via voice operation (vehicles with Bluetooth
® 2.0 interface)
Desired tracks can be selected and played from your USB memory device by “Artist”,
“Album”, “Playlist” and “Genre” using voice commands.
For information concerning the voice recognition function or speaker registration
function, refer to “Bluetooth® 2.0 interface”.
The pla
Stability control function
The stability control function is designed to help the driver maintain control
of the vehicle on slippery roads or during rapid steering manoeuvres. It works by
controlling the engine output and brake on each wheel.
Note
► The stability control function operates at speeds of about 15 km
