Mitsubishi Outlander: Selector lever operation
Except for vehicles with Sports mode
The transmission has 4 forward gears and 1 reverse gear.
The individual gears are selected automatically, depending on the position of the gear selector lever, the speed of the vehicle and the position of the accelerator pedal.
The selector lever has 7 positions, and is equipped with a lock button (A) to avoid inadvertent selection of the wrong gear.
Button must be pushed
and brake pedal must be depressed to move the lever
Button must be pushed
to move the lever.
Button need not be pushed
to move the lever.
READ NEXT:
Vehicles with Sports mode
The transmission has 4 forward gears and 1 reverse gear.
The individual gears are selected automatically, depending on the position of
the gear selector lever, the speed of the vehicle and the po
Indicator lamps
A- Selector lever position indicator lamp B- “N” indicator lamp
The indication lamps in the instrument panel are for indication the selector
lever position and one of them will be illuminated
Selector positions
P - PARK
This position locks the transmission to prevent the vehicle from moving. The
engine can be started in this position.
R - REVERSE
Move the lever to this position only after the vehicle ha
SEE MORE:
If the vehicle breaks down
If the vehicle breaks down on the road, move it to the shoulder and turn on the
hazard warning flashers and set up a warning triangle, flashing lamp, etc.
Refer to “Hazard warning flasher switch”.
If the engine stops/fails
Vehicle operation and control are affected if the engine stops.
Bef
Cooling (Vehicles with air conditioning)
Set the mode selection dial to the “”
position.
Set the air selection switch (A) to the outside position and push the air conditioning
switch (B).
Adjust the temperature by turning the temperature control dial clockwise or anticlockwise.
Select the desired blower speed.
NOTE
If the o
© 2010-2025 Copyright www.mioutlander.com
