Mitsubishi Outlander: Side turn-signal lamps
Mitsubishi Carisma / Mitsubishi Carisma Owner's Manual / For emergencies / Replacement of lamp bulbs / Side turn-signal lamps
Insert a straight blade (or minus) screwdriver at the edge of the lens, remove the socket assembly and bulb together by turning it anticlockwise, and then remove the bulb by pulling out.
NOTE
Wrap a piece of cloth around the straight blade (or mines) screwdriver in order to avoid scratching the lens and the body.
READ NEXT:
Front fog lamps
Remove the cover mounting screw.
Remove bolts (1) and (2) with a screwdriver, and pull the lamp body towards you.
NOTE
Do not turn the aiming adjusting bolt (3).
Remove the connector secured
Rear combination lamps
Hatchback
Remove the lid.
Turn the bulb socket anti-clockwise to remove it. And remove it anti-clockwise
while pressing it inward.
1- Tail lamp 2- Rear turn-signal lamp 3- Stop lamp
Sedan
T
Rear lid lamp
Remove the cover with a screwdriver. Turn the bulb socket anti-clockwise to remove
it. And remove the bulb from the socket by turning it anti-clockwise while pressing
it inward.
1- Reversing la
SEE MORE:
Operation of the Twin Clutch SST
Caution
► Before selecting a position with the engine running and the vehicle stationary,
fully depress the brake pedal to prevent the vehicle from creeping.
The vehicle will begin to move as soon as the Twin Clutch SST is engaged, the brakes
should only be released when you are ready t
Adjustable seat belt anchor (front seats)
The seat belt anchor height can be adjusted.
Move the seat belt anchor down with the lock knob (A) depressed. To move the
anchor up, slide it without depressing the lock knob (A).
Warning
► When adjusting the seat belt anchor, set it at a position that is sufficiently
high so that th
© 2010-2025 Copyright www.mioutlander.com
