Mitsubishi Outlander manuals

Mitsubishi Outlander: Rear combination lamps

Hatchback

Hatchback

Remove the lid.

Turn the bulb socket anti-clockwise to remove it. And remove it anti-clockwise while pressing it inward.

1- Tail lamp
2- Rear turn-signal lamp
3- Stop lamp

Sedan

Sedan

Turn and remove the knob (1) and then turn down the cover.

Turn the bulb socket anti-clockwise to remove it. And remove the bulb from the

Turn the bulb socket anti-clockwise to remove it. And remove the bulb from the socket by turning it anticlockwise while pressing it inward.

1- Rear turn-signal lamp
2- Stop and tail lamp
3- Tail lamp

READ NEXT:

 Rear lid lamp

Remove the cover with a screwdriver. Turn the bulb socket anti-clockwise to remove it. And remove the bulb from the socket by turning it anti-clockwise while pressing it inward. 1- Reversing la

 High–mounted stop lamp

Hatchback Place the groove of clip top as shown, then remove the cover. Undo bolts (A), remove the lamp body, and disconnect the connector. Undo screws (B) and take the bulb out of its socket

 Sedan

Place the grove of clip top as shown, then remove the cover. Remove the bulb from the socket by turning it anticlockwise while pressing it inward.

SEE MORE:

 Supplemental restraint system (SRS) - air bag

The information written in this supplemental restraint system (SRS) section contains important points concerning the driver, front passenger, side air bags and pre-tensioner seat belts. The SRS air bags are designed to supplement the primary protection of the driver and front passenger side s

 Turn-signal lever

1- Turn-signals When making a normal turn, use position (1). The lever will return automatically when cornering is completed. 2- Lane-change signals When moving the lever to (2) slightly to change a lane, the turn-signal lamps and indication lamp in the instrument cluster will only flash wh

© 2010-2025 Copyright www.mioutlander.com