Mitsubishi Outlander: Rear lid lamp

Remove the cover with a screwdriver. Turn the bulb socket anti-clockwise to remove
it. And remove the bulb from the socket by turning it anti-clockwise while pressing
it inward.
1- Reversing lamp
2- Rear fog lamp


Sedan
Remove the clips and then turn down the cover.


Turn the bulb socket anti-clockwise to remove it. And remove the bulb from the
socket by turning it anti-clockwise while pressing it inward.
1- Reversing lamp
2- Rear fog lamp

READ NEXT:
Hatchback
Place the groove of clip top as shown, then remove the cover.
Undo bolts (A), remove the lamp body, and disconnect the connector.
Undo screws (B) and take the bulb out of its socket
Place the grove of clip top as shown, then remove the cover.
Remove the bulb from the socket by turning it anticlockwise while pressing it
inward.
Remove the lens mounting screws, remove the lens, then remove the bulb by pulling
out.
SEE MORE:
When this switch is operated, the passenger’s switches cannot be used to open
or close the door windows and the driver’s switch cannot open or close any door
windows other than the driver’s door window.
To unlock, press it once again.
1- Lock
2- Unlock
Warning
► A child may t
The side airbags and curtain airbags are not designed to deploy in conditions
where they cannot usually provide protection to the occupant. Typical conditions
are shown in the illustration.
1- Head-on collisions
2- Rear end collisions
Because the side airbags and curtain airbags do not prot
© 2010-2026 Copyright www.mioutlander.com
