Mitsubishi Outlander: Steering wheel lock
[For vehicles equipped with keyless operation system]
For information on operations for vehicles equipped with the keyless operation system, refer to “Keyless operation system: Steering wheel lock” on pages 1-15, 1-19.
[Except vehicles equipped with keyless operation system]
To lock
Remove the key at the “LOCK” position.
Turn the steering wheel until it is locked.
To unlock
Turn the key to the “ACC” position while moving the steering wheel slightly right and left.
Caution
► Remove the key when leaving the vehicle.
In some countries, it is prohibited to leave the key in the vehicle when parked.
READ NEXT:
Tips for starting
► Do not operate the starter motor continuously longer than 10 seconds; doing
so could run down the battery. If the engine does not start, turn the ignition switch
back to “LOCK”, wait a
Starting the engine (petrol-powered vehicles)
[For vehicles equipped with keyless operation system]
For information on operations for vehicles equipped with the keyless operation
system, refer to “Keyless operation system: Starting” on pag
SEE MORE:
Operating the system as an automatic air conditioning
In normal conditions, use the system in the AUTO mode and follow these procedures:
1- Set the blower speed selection dial to “AUT” position.
2- Turn the temperature control dial to set the desired temperature.
The temperature can be set within a range of 15 to 29.
The temperature will grad
Traction control function
On slippery surfaces, the traction control function prevents the drive wheels
from excessive spinning, thus helping the vehicle to start moving from a stopped
condition. It also provides sufficient driving force and steering performance as
the vehicle turns while pressing the acceleration peda
© 2010-2025 Copyright www.mioutlander.com
