Mitsubishi Outlander: To store the flat tyre or spare wheel
Mitsubishi ASX / Mitsubishi ASX Owner's Manual / For emergencies / How to change a tyre / To store the flat tyre or spare wheel
1. Lift up the luggage floor board.
2. To store the flat tyre or spare wheel, fit the installation clamp (A) by turning
it clockwise.
NOTE
• On vehicles with a T155/90D16 or T125/90D16 size spare wheel, the clamp cannot be used for a normal size tyre.
3. Have your damaged tyre repaired as soon as possible.
To store the tools and jack
Reverse the removing procedure when storing the jack, jack bar and wheel nut wrench.
Refer to “Tools, jack and tyre repair kit”.
READ NEXT:
Wheel covers
To removeWrap the tip of the jack bar with a cloth, insert it deeply into
the notch provided in the wheel cover, and pry the cover away from the wheel. Using
the same procedure at the other wheel
If your vehicle needs to be towed
If you need to tow your vehicle, we recommend that you contact a MITSUBISHI MOTORS
Authorized Service Point or tow truck company.
In the following cases, transport the vehicle using a tow truck.
SEE MORE:
Engine compartment fuse location table
1: Except for petrol-powered vehicles equipped with turbocharger
2: Petrol-powered vehicles with turbocharger
3: Fusible link
1: Except for petrol-powered vehicles equipped with turbocharger
2: Petrol-powered vehicles with turbocharger
3: Fusible link
► Some fuses may not be in
Chassis and underbody protection
Your vehicle’s underbody has been treated at the factory in order to protect
it from rust and corrosion. Some areas have been injected with anti-corrosion agents
and wax. The effectiveness of these measures, however, will be reduced by flying
stones, road chemicals, etc., as the vehicle is d
© 2010-2026 Copyright www.mioutlander.com
