Mitsubishi Outlander: Water temperature gauge
Mitsubishi Carisma / Mitsubishi Carisma Owner's Manual / Instruments and controls / Water temperature gauge
The water temperature gauge indicates the engine coolant temperature when the ignition switch is “ON”.
CAUTION
If the indication needle enters the overheating zone while the engine is running, it indicates that the engine is possibly overheating. Immediately park your vehicle in a safe place and make the necessary corrections. (Refer to “Engine overheating” on page 8–15.)
While driving, care should always be taken to maintain the normal operating temperature.
READ NEXT:
Indication and warning lamps
A: Petrol-powered vehicle B: Diesel-powered vehicle
1- Turn-signal indication lamps/Hazard warning lamps 2- Automatic transmission
indication lamp (vehicles with A/T only, “N” indicator lamp
Combination headlamps, dipper and turn signal switch
Headlamps
Rotate the switch to turn on the lamps.
–All lamps off
–Position, tail, licence–plate, and
instrument panel lamps on
–Headlamps on and other lamps remain
on
Lamp monitor
Turn/lane-change signals
The turn-signal lamps flash when the switch is operated (with the ignition switch
“ON”). At the same time, the turn signal indicator flashes.
1- Turn-signals
When making a normal turn, use p
SEE MORE:
Used engine oils safety instructions and disposal information
Warning
► Prolonged and repeated contact may cause serious skin disorders, including
dermatitis and cancer.
► Avoid contact with the skin as far as possible and wash thoroughly after any
contact.
► Keep used engine oils out of reach of children.
Protect the environment
It
Front fog lamps
Remove the cover mounting screw.
Remove bolts (1) and (2) with a screwdriver, and pull the lamp body towards you.
NOTE
Do not turn the aiming adjusting bolt (3).
Remove the connector secured at the bracket.
Undo the lamp cover while pressing on the lugs, then disconnect the connector.
© 2010-2025 Copyright www.mioutlander.com
