Mitsubishi Outlander: Wheel covers
To remove
Wrap the tip of the wheel nut wrench with a cloth, insert it at the edge of the wheel cover, and pry the cover away from the wheel.
NOTE
The wheel cover is made of plastic; take care when prying it off.
CAUTION
Removing the cover with your hands may cause injury to the fingers.
READ NEXT:
To install
Align the tyre valve with the valve opening provided on the wheel cover.
Then tap around the outer edge of the wheel cover with your hand to secure it
in place.
NOTE
Full wheel covers have a sy
If a tyre is punctured
If a tyre must be changed due to a puncture, do so only after first following
every precaution for safety: parking the vehicle in a place where it is not a traffic
hazard or dangerous to you and y
Towing
Your vehicle may be towed either by another vehicle with a rope, or by a tow
truck.
The regulations concerning towing may differ from country to country. It is recommended
that you obey the regul
SEE MORE:
The front airbags and driver’s knee airbag ARE NOT DESIGNED TO DEPLOY when…
The front airbags and driver’s knee airbag are not designed to deploy in conditions
where they cannot typically provide protection to the occupant.
Such conditions are shown in the illustration.
1- Rear end collisions
2- Side collisions
3- Vehicle rolls onto its side or roof
Because the f
Cargo loads
Cargo loads precautions
CAUTION
• Do not load cargo or luggage higher than the top of the seatback. Be sure
that your cargo or luggage cannot move once your vehicle is moving. Having the driver’s
vision blocked, and your cargo being thrown inside the cabin if you suddenly have
to brake
© 2010-2026 Copyright www.mioutlander.com
