Mitsubishi Outlander: Wheel covers
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / For emergencies / How to change a tyre / Wheel covers
READ NEXT:
To remove
1. Wrap the tip of the bar with a cloth, insert it deeply into the notch provided
in the wheel cover, and use it to lever up the cover a little.
2. With the cover raised a little, pry it off comp
To install
1. Make sure the tabs (A) of the back of the wheel cover are not broken and correctly
fitted on the rings (B). If in doubt, do not install the wheel cover and consult
your MITSUBISHI MOTORS Author
SEE MORE:
Cancelling the alarm
It is possible to halt the activation of an alarm using the following methods:
► Pressing the LOCK or UNLOCK switch on the remote control switch.
(After pressing the LOCK switch, the vehicle will lock if all the doors and rear
hatch are closed, after which the system preparation mode will
If your vehicle tows another vehicle
1. Take out the towing hook, wheel nut wrench and jack bar. Refer to “Tools and
jack”.
2. Cover the tip of the jack bar with a cloth, then use it to remove the cover
(D) that is located on the rear bumper.
3. Use the wheel nut wrench (E) to firmly attach the towing hook (F).
4. Always
© 2010-2025 Copyright www.mioutlander.com
