Mitsubishi Outlander: Auto mode
(MITSUBISHI genuine audio only)
The automatic adjustment mode can set the local time automatically by using the signal from the local RDS stations. In this mode, “CT” (A) (Clock Time: sent with the RDS signal) is shown in the audio display.
READ NEXT:
Manual mode
The manual adjustment mode is also available in case the “Auto mode” shows the
incorrect time when the adjacent local RDS stations are located in a different time
zone.
For manual time adjust
Display mode
For vehicles with a MITSUBISHI genuine audio, average fuel consumption, driving
range and average speed can be displayed besides average fuel consumption by pushing
the “DISP” button in the au
Change of display mode (for vehicles with a MITSUBISHI genuine audio system)
Every time the “DISP” button is pressed lightly (less than 2 seconds), the display
can be changed.
Average fuel consumption Driving range Average speed
SEE MORE:
Turn-signal indication lamps/ Hazard warning indication lamps
These indication lamps blink in the following situations.
► When the turn-signal lever is moved to activate a turn-signal lamp.
Refer to “Turn-signal lever”.
► When the hazard warning flasher switch is pressed to activate the hazard warning
lamps.
Refer to “Hazard warning f
To store the flat tyre or spare wheel
1. Lift up the luggage floor board.
2. To store the flat tyre or spare wheel, fit the installation clamp (A) by turning
it clockwise.
NOTE
• On vehicles with a T155/90D16 or T125/90D16 size spare wheel, the clamp cannot
be used for a normal size tyre.
3. Have your damaged tyre repaired
© 2010-2026 Copyright www.mioutlander.com
