Mitsubishi Outlander: Air purifier
Mitsubishi Outlander 2007-2013 Owner's Manual / For pleasant driving / Air purifier
An air filter has been incorporated into this air conditioning so that pollen and dust are cleaned from the air.
Replace the air filter periodically as its ability to clean the air will be reduced as it collects pollen and dirt. For the maintenance interval, refer to the “SERVICE BOOKLET”.
NOTE:
● Operation in certain conditions such as driving on a dusty road and frequent use of the air conditioning can lead to reduction of service life of the filter. When you feel that the air flow is lower than normal or when the windshield or windows start to fog up easily, replace the air filter.
We recommend you to have it checked.
READ NEXT:
LW/MW/FM digital tuning radio with CDplayer
The audio system can only be used when the ignition switch is in the “ON” or
“ACC” position.
NOTE:
● When listening to the audio system with the engine stopped, be sure to turn
the
LW/MW/FM digital tuning radio with CDchanger
The audio system can only be used when the ignition switch is in the “ON” or
“ACC” position.
NOTE:
● When listening to the audio system with the engine stopped, be sure to turn
the
To use the external audio input function(vehicles with a rear-seat display)
Auxiliary Video connecter (RCA).
A- Left audio input connecter (white).
B- Right audio input connecter (red).
C- Video input connecter (yellow).
You can listen to commercially available audio eq
SEE MORE:
DTC No.C161F, C1621, C1624, C1626, C1627,
C1628, C1629, C1630, C1631, C1632, C1633, C2100, C2101, C2203, C2205
Code No.C161F: AWC actuator protection 1
CAUTION
If there is any problem in the CAN bus lines,
an incorrect diagnostic trouble code may be
set. Prior to this diagnosis, diagnose the CAN
bus lines.
Whenever the ECU is replaced, ensure that
the CAN bus lines are normal.
OPERATION
The AWC-ECU c
Instrument Panel Assembly
Adhesive
NOTE: The symbol in parentheses indicates a part
number.
Special Tool
Instrument Panel Assembly
REMOVAL AND INSTALLATION
The following bolts and screws are used for installing
the instrument panel: The bolts and screws are indicated
by symbols in the illustrations in sections
"REMOVAL AN
© 2010-2025 Copyright www.mioutlander.com
