Mitsubishi Outlander manuals

Mitsubishi Outlander: At extreme cold ambient temperature

If the engine won’t start, depress the accelerator pedal about halfway while cranking the engine. Once the engine starts, release the accelerator pedal.

CAUTION

When starting the engine, make sure that you press on the brake pedal. At extreme cold ambient temperature, move your foot to the brake pedal immediately after the engine has started.

READ NEXT:

 Starting the engine (Diesel-powered vehicles)

1. Insert the ignition key and fasten the seat belt. 2. Apply the parking brake. 3. Depress and hold the brake pedal. 4. Place the gearshift lever in the “N” (Neutral) position. 5. Fully dep

 Manual transmission

The shift pattern is shown on the gearshift lever knob. Be sure to always fully depress the clutch pedal before attempting to shift the lever.

 For smooth gearchanging

Depress the clutch pedal completely. 1st and 2nd gear: first move the gear lever fully left and then forward or back into 1st and 2nd gear. 3rd and 4th gear: move the gear lever forward or b

SEE MORE:

 Stop and tail lamps and rear turn-signal lamps

1. Insert a straight blade (or minus) screwdriver with the end covered with a cloth or other object at the edge of the cover and pry gently to remove the cover. 2. Remove the socket and bulb assemblies by turning them anticlockwise. A- Rear turn-signal lamp B- Stop and tail lamp 3. Remove

 To turn from “ACC” to “LOCK”

1. [Vehicles equipped with M/T] Push the emergency key in at the “ACC” position and keep it depressed until it is turned to the “LOCK” position, and remove it. [Vehicles equipped with CVT or Twin Clutch SST] First, set the selector lever (CVT) or the gearshift lever (Twin Clutch SST) to

© 2010-2026 Copyright www.mioutlander.com