Mitsubishi Outlander: Starting
- Tips for starting
- Starting the engine (Petrol-powered vehicles)
- Normal conditions
- Flooded engine
- At extreme cold ambient temperature
- Starting the engine (Diesel-powered vehicles)
READ NEXT:
Tips for starting
(1) Do not operate the starter motor continuously for anything longer than 10
seconds; doing so could run down the battery. If the engine does not start, turn
the ignition switch back to “LOCK
Starting the engine (Petrol-powered vehicles)
This vehicle is equipped with an electronically controlled fuel injection system
which is automatically controlled. When starting the engine, do not depress the
accelerator pedal.
Normal conditions
The starting procedure is as follows :
1. Insert the ignition key and fasten the seat belt. 2. Apply the parking brake.
3. Depress and hold the brake pedal. 4. Place the gearshift lever (manual tra
SEE MORE:
Lamps (headlamps, fog lamp, etc.) auto-cutout function
• If the following operation is performed while the lamp switch is in the
position, the lamps will automatically
go out when the driver’s door is opened.
[Except for vehicles equipped with keyless operation system]
The ignition switch is turned to the “LOCK” or “ACC” position, or t
Cup holder
CAUTION:
● Do not drink beverages while driving. This is distracting and could cause an
accident.
For the driver’s seat
There is a built-in cup holder in the instrument panel on the driver’s side.
Pressing the centre of the lid causes the tray to pop out a little.
Pull it out comp
© 2010-2025 Copyright www.mioutlander.com
