Mitsubishi Outlander: Flooded engine
If the engine has become flooded during starting, first operate the starter for
5 to 6 seconds while fully depressing the accelerator pedal, then start the engine
without depressing the accelerator pedal.
READ NEXT:
If the engine won’t start, depress the accelerator pedal about halfway while
cranking the engine. Once the engine starts, release the accelerator pedal.
CAUTION
When starting the engine, make su
1. Insert the ignition key and fasten the seat belt. 2. Apply the parking brake.
3. Depress and hold the brake pedal. 4. Place the gearshift lever in the “N” (Neutral)
position. 5. Fully dep
The shift pattern is shown on the gearshift lever knob. Be sure to always fully
depress the clutch pedal before attempting to shift the lever.
SEE MORE:
This warning is displayed if you drive with the parking brake still applied.
The warning lamp in the instrument cluster only illuminates when the parking brake
is applied.
Caution
► If a vehicle is driven without releasing the parking brake, the brake will
be overheated, resulting i
To open
Pull the release lever towards you to unlock the bonnet.
Raise the bonnet while pressing the safety lock.
NOTE Only open the bonnet when the wipers are in the parked position. Failure
to do so may cause paint/body damage.
Support the bonnet by inserting the support bar in its slo
© 2010-2026 Copyright www.mioutlander.com
