Mitsubishi Outlander: SRS servicing
Warning
► We recommend any maintenance performed on or near the components of the
SRS to be performed by a MITSUBISHI MOTORS Authorized Service Point.
Improper work on the SRS components or wiring could result in inadvertent deployment
of the airbags, or could render the SRS inoperative; either situation could result
in serious injury.
► Do not modify your steering wheel, seat belt retractor or any other SRS components.
For example, replacement of the steering wheel, or modifications to the front bumper
or body structure can adversely affect SRS performance and lead to possible injury.
► If your vehicle has sustained any damage, we recommend you to have the SRS inspected
to ensure it is in proper working order.
► On vehicles equipped with side airbags, do not modify your front seats, centre
pillar and centre console.
It can adversely affect SRS performance and lead to possible injury. If you found
any tear, scratch, crack or damage to the seat fabric near the side airbag, the
portion of the front and rear pillars and roof side rail, you should have the SRS
inspected by a MITSUBISHI MOTORS Authorized Service Point.
Note
► When you transfer ownership of the vehicle to some other person, we urge you
to alert the new owner that it is equipped with the SRS and refer the new owner
to the applicable section in this owner’s manual.
► If your vehicle has to be scrapped, do this in line with local legislation and
contact a MITSUBISHI MOTORS Authorized Service Point to safely dismantle the airbag
system.
READ NEXT:
Instruments
1- Tachometer ®
2- Multi-information display ®
Information screen display list ®
3- Speedometer (km or mph + km/h)
4- Daytime dipper button (meter illumination control) ®
Tachometer
The tachometer indicates the engine speed (r/min).
The tachometer helps you to obtain more economical driving and also warns you
of excessive engine speeds (Red zone).
Caution
► When dri
SEE MORE:
Headlamp washer switch
The headlamp washer can be operated with the ignition switch or the operation
mode in ON or ACC and the lamp switch at the
position.
Push the button once and the washer fluid will be sprayed on to the headlamps.
NOTE
• If the ignition switch or the operation mode is in ON or ACC and the
Steering wheel lock
[For vehicles equipped with the keyless operation system].
For information on operations for vehicles equipped with the keyless operation
system, refer to “Keyless operation system:
Steering wheel lock”.
[Except for vehicles equipped with the keyless operation system].
To lock
Remove the
