Mitsubishi Outlander: Average fuel consumption
This value shows the average fuel consumption (in L/100 km or mpg) since the display was reset. If you reset the display at the time when you want to start the measurements, average fuel consumption from that point of time can be displayed.
To reset the display
[Vehicles without MITSUBISHI genuine audio]
Push the button (A) for more than 2 seconds.
![[Vehicles with MITSUBISHI genuine audio]](images/books/119/2/page.h65.jpg)
[Vehicles with MITSUBISHI genuine audio]
Push the “DISP” button for more than 2 seconds.
NOTE
(1) When the ignition switch is turned on, the average fuel consumption which
was being displayed when the ignition switch was previously turned off will be displayed
once again.
(2) Average fuel consumption varies according to the conditions under
which a vehicle is travelling (road conditions, the manner in which the vehicle
is being driven, etc.). Observe this display for reference because the fuel consumption
display may differ from the actual fuel consumption.
READ NEXT:
Driving range
For vehicles with MITSUBISHI genuine audio, driving range can be displayed.
This value shows the distance (in km or miles) that can be driven on the fuel
remaining in the fuel tank.
NOTE
(1) Wh
Average speed
For vehicles with MITSUBISHI genuine audio, average speed can be displayed. This
value shows the average speed (in km/h or mph) since the display was reset. If you
reset the display at the time
Display brightness adjustment / Display unit selection
Display brightness adjustment
1. Press the “H” button while pressing the button (A) to activate the display
brightness selection function.
2. Adjust the brightness by moving the cursor with
SEE MORE:
For cold and snow weather
Ventilation slots
The ventilation slots in front of the windscreen should be brushed clear after
heavy snowfall so that the operation of the heating and ventilation systems will
not be impaired.
Weatherstripping
To prevent freezing of the weatherstripping on the doors, bonnet, etc., they
sh
Mark display screen (when the ignition switch is “ON”)
This is displayed when you press the multi- information meter switch and switch
the warning display screen.
This mark is also displayed if there is another warning other than the one displayed.
When the cause of the warning display is eliminated, the
mark goes out automatically.
Note
