Mitsubishi Outlander: Display brightness adjustment / Display unit selection
Mitsubishi Carisma / Mitsubishi Carisma Owner's Manual / Instruments and controls / Digital clock / Display brightness adjustment / Display unit selection
Display brightness adjustment
1. Press the “H” button while pressing the button (A) to activate the display brightness selection function.
2. Adjust the brightness by moving the cursor with the “H” or “M” button.
H- Decrease brightness
M- Increase brightness
3. Press the “SET” button to determine the setting. The display will return to the original display item.
NOTE
(1) To cancel the brightness adjusting procedure before completion, press
the button (A).
(2) If the “SET” button is not pressed for about 15 seconds or
longer in the middle of the adjustment, the currently selected brightness is set
automatically. Then, the display returns to the original display item.
READ NEXT:
Display unit selection
Originally, km/h and L/100 km are selected. When you want to select the unit
“mile”, follow this procedure.
NOTE
For vehicles without MITSUBISHI genuine audio system, only the unit of averag
Running-in recommendations
During the running-in period for the first 1,000 km, it is advisable to drive
your new vehicle using the following precautions as a guideline to aid long life
as well as future economy and perform
SEE MORE:
Front passenger seat belt warning lamp
The front passenger seat belt warning lamp is located on the instrument panel.
The lamp comes on when a person sits on the front passenger seat but does not
fasten the seat belt. It goes off when the seat belt is subsequently fastened.
WARNING
• Do not install any accessory or sticker that
Sun visors
1- To eliminate front glare
2- To eliminate side glare
Vanity mirror
Type 1
A vanity mirror is fitted to the back of the sun visor.
Operating the lid of the vanity mirror will automatically turn on the mirror
lamp (A).
CAUTION
• If the lid of vanity mirror with lamp is kept open for
© 2010-2025 Copyright www.mioutlander.com
