Mitsubishi Outlander: Average speed display
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Instruments and controls / Multi-information display / Average speed display
This displays the average speed from the last reset to the present time.
There are the following 2 mode settings.
For the method for changing the average speed display setting, refer to “Changing the function settings (when the ignition switch is “ON”)”.
READ NEXT:
Manual reset mode
► When the average speed is being displayed, if you hold down the multi-information
meter switch, the average speed displayed at that time is reset.
► When the ignition switch is switch
Auto reset mode
► When the average speed is being displayed, if you hold down the multi-information
meter switch, the average speed displayed at that time is reset.
► If the ignition switch is at “AC
Average fuel consumption display
This displays the average fuel consumption from the last reset to the present
time.
There are the following 2 mode settings.
For information on how to change the average fuel consumption display s
SEE MORE:
Bluetooth® 2.0 interface
The Bluetooth® 2.0 interface allows for making/receiving hands-free calls in
the vehicle using a Bluetooth ® compatible cellular phone based on the wireless
communication technology commonly known as Bluetooth®. It also allows the user to
play music, saved in a Bluetooth® music player, fro
Brake fluid/Clutch fluid
The brake fluid and the clutch fluid share the reservoir tank.
To check the fluid level
The fluid level must be between the “MAX” and “MIN” marks on the reservoir.
The fluid level is monitored by a float. When the fluid level falls below the
“MIN” mark, the brake fluid warning lam
© 2010-2025 Copyright www.mioutlander.com
