Mitsubishi Outlander: Average fuel consumption display
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Instruments and controls / Multi-information display / Average fuel consumption display
This displays the average fuel consumption from the last reset to the present time.
There are the following 2 mode settings.
For information on how to change the average fuel consumption display setting, refer to “Changing the function settings (when the ignition switch is “ON”)”.
The 
mark (A) in the momentary fuel
gauge shows the average fuel consumption.
READ NEXT:
Manual reset mode
► When the average fuel consumption is being displayed, if you hold down the
multi-information meter switch, the average fuel consumption displayed at that time
is reset.
Instruments and controls
► When the ignition switch is switched from “ACC” or “LOCK” to “ON”, the mode
setting is automatically switched from manual to auto.
Switching to auto occurs automatically. If swi
Auto reset mode
► When the average fuel consumption is being displayed, if you hold down the
multi-information meter switch, the average fuel consumption displayed at that time
is reset.
► If the ign
SEE MORE:
To remove
1. Wrap the tip of the bar with a cloth, insert it deeply into the notch provided
in the wheel cover, and use it to lever up the cover a little.
2. With the cover raised a little, pry it off completely using the jack bar.
Insert the jack bar under the cover, and move it around the circumferen
LW/MW/FM digital tuning radio with CDplayer
The audio system can only be used when the ignition switch is in the “ON” or
“ACC” position.
NOTE:
● When listening to the audio system with the engine stopped, be sure to turn
the ignition switch to the “ACC” position.
● If a cellular phone is used inside the vehicle,
© 2010-2025 Copyright www.mioutlander.com
