Mitsubishi Outlander: Instruments and controls
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Instruments and controls / Multi-information display / Average fuel consumption display / Instruments and controls
► When the ignition switch is switched from “ACC” or “LOCK” to “ON”, the mode setting is automatically switched from manual to auto.
Switching to auto occurs automatically. If switching to manual mode is done, however, the data from the last reset is displayed.
READ NEXT:
Auto reset mode
► When the average fuel consumption is being displayed, if you hold down the
multi-information meter switch, the average fuel consumption displayed at that time
is reset.
► If the ign
Momentary fuel consumption display
While driving, this displays the momentary fuel consumption, using a bar graph.
When the momentary fuel consumption surpasses the average fuel consumption, the
momentary fuel consumption is displ
Function setting screen
The “Display language”, “Temperature unit”, “Fuel consumption unit”, and “Average
fuel consumption and speed reset method” etc. settings can be modified as desired.
Refer to “Ch
SEE MORE:
Washer fluid
The windscreen washer fluid reservoir is in the engine compartment.
Check the washer fluid level at regular intervals and add washer fluid to reservoir
if necessary.
Open the reservoir cap and check the fluid level with the dipstick.
Note
► The washer fluid container serves the windsc
To listen to a CD
The CD can be loaded or ejected by pressing the LOAD button (5) or the eject
button (15) even if the audio system power is off.
1. Press the PWR switch (3) to turn the audio system ON and OFF. The audio system
turns on in the last mode used.
2. Press the CD button (2) to enter CD mode.
The au
© 2010-2026 Copyright www.mioutlander.com
