Mitsubishi Outlander: Bluetooth® device control panel and display
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / For pleasant driving / To play tracks from a Bluetooth® device (vehicles with Bluetooth® 2.0 interface) / Bluetooth® device control panel and display
1- CD (Mode change) button
2- PWR (On-Off) button
3- PAGE (Title scroll) button
4- DISP (Title display) button
5- RPT (Repeat) button
6- RDM (Random) button
7- DISC DOWN (Pause/Stop) button
8- DISC UP (Play) button
9- SCAN button
10- TRACK (Track up/down) button
11- B (Bluetooth®) indicator
12- TRACK indicator
13- RPT/RDM/SCAN indicator
READ NEXT:
To listen to tracks from a device connected via Bluetooth
1. Press the PWR button (2) to turn on the audio system. The system turns on
in the last mode used.
2. Press the CD button (1) several times to switch to the B (Bluetooth®) mode.
The input mode
To use the external audio input function
Auxiliary Audio connector (RCA)
A- Left audio input connector (white)
B- Right audio input connector (red)
Auxiliary Video connector (RCA)
A- Left audio input connector (white)
B- Right audio i
Steering wheel audio remote control switches
The remote control switch is located on the left side of the steering wheel.
It can be used when the ignition switch is in the “ON” or “ACC” positions.
1- Volume up button
2- Volume down
SEE MORE:
To store the flat tyre or spare wheel
1. Lift up the board.
2. To store the flat tyre or spare wheel, fit the installation clamp (A) by turning
it clockwise.
Note
► On vehicles equipped with a compact spare wheel, the clamp cannot be used for
a normal size tyre.
3. Have your damaged tyre repaired as soon as possible.
T
Antenna
To remove
Turn the pole (A) anticlockwise.
To install
Screw the pole (A) clockwise into the base (B) until it is securely retained.
Note
► Be sure to remove the roof antenna in the following cases:
• When using an automatic car wash.
• When placing a car cover over the vehicle.
© 2010-2025 Copyright www.mioutlander.com
