Mitsubishi Outlander: Charge warning lamp
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Instruments and controls / Warning lamps / Charge warning lamp
This lamp illuminates when the ignition switch is turned to the “ON” position, and goes off after the engine has started.
A warning is also displayed on the multiinformation display.
Caution
► If it illuminates while the engine is running, there is a problem in the charging system. Immediately park your vehicle in a safe place and we recommend you to have it checked.
READ NEXT:
Fuel filter indicator display
When the ignition switch is “ON”, if more than specified limit water has accumulated
in the fuel filter, a warning display is displayed on the information screen in
the multi-information dis
Brake warning display
This warning is displayed if you drive with the parking brake still applied.
The warning lamp in the instrument cluster only illuminates when the parking brake
is applied.
Caution
► If
SEE MORE:
Tyres and wheels
Since the driving torque can be applied to the 4 wheels, the driving performance
of the vehicle when operating in 4-wheel drive is greatly affected by the condition
of the tyres.
Pay close attention to the tyres.
► Install only the specified tyres on all wheels.
Refer to “Tyres and wh
LW/MW/FM digital tuning radio with CD changer
The audio system can only be used when the ignition switch is in the “ON” or
“ACC” position.
Note
► When listening to the audio system while the engine is not running, be sure
to turn the ignition switch to the “ACC” position.
If the ignition switch is left in the “ACC”
© 2010-2025 Copyright www.mioutlander.com
