Mitsubishi Outlander: Combination of unheated air and heated air

Set the mode selection dial to the position shown in the illustration and set
the air selection switch (A) to the outside position.
The air will be directed to the leg area and the upper part of the passenger
compartment. Select desired blower speed.
Warm air flows to the leg area and unheated or slightly warm air flows to the
upper part of the passenger compartment.

READ NEXT:
CAUTION
For safety, make sure you have a clear view through all windows.
To remove frost or mist from the windscreen and door windows, use the mode selection
dial (“” or “”).
- To ke
To introduce air into the vehicle during hot weather, set the air selection switch
(A) to the outside position and set the temperature control dial to the position
shown in the illustration. Be
Set the mode selection dial to the “”
position.
Set the air selection switch (A) to the outside position and push the air conditioning
switch (B).
Adjust the temperature by turning the tem
SEE MORE:
Adjust the seatback angle by turning the dial.
1- To move to forward direction 2- To recline rearward
WARNING
To minimize the risk of personal injury in the event of a collision or
sudden braking, the seatbacks should always be in almost upright position while
the vehicle is in motion. The
When there is a malfunction in the system, the warning display will appear on
the information screen in the multi-information display.
In addition, the ACD control mode display in section (A) will go out at the same
time.
Caution
► The system may be malfunctioning.
Park your vehicle
© 2010-2026 Copyright www.mioutlander.com
