- Alternator
- Drive belt auto-tensioner
- Crankshaft pulley
- Air conditioner compressor
- Water pump
WARNING
- Make sure the ignition switch is in the OFF or LOCK position before inspecting or servicing the drive belt. The engine could rotate or start unexpectedly and cause serious injury.
1. Visually inspect the drive belt for abnormal wear, cracks, cuts, fraying, or other visible deterioration. If the belt is damaged or in poor condition, have it replaced. It is recommended that you visit an authorized Mitsubishi Motors dealer for this service.
2. Have the drive belt condition inspected regularly as part of normal Mitsubishi Outlander maintenance.
READ NEXT:
WARNING
Before working on the spark plugs, make sure the engine and ignition switch are off and the parking brake is applied securely.
CAUTION
Use the correct spark plug socket when removin
To remove the air cleaner filter, release lock pins 1 and pull the air cleaner unit upward in direction 2.
The air filter is not designed to be cleaned and reused. Replace it when required.
Cleaning
If the windshield does not become clear after operating the windshield washer, or if the wiper blades chatter, skip, or leave streaks while moving, wax, dirt, road film, or other contaminati
SEE MORE:
Bird's eye-view/Rear-view mode
This mode displays a bird's-eye representation of the area surrounding the vehicle together with the view directly behind the Mitsubishi Outlander.
Side-view/Rear-view mode
This mode displays the area along the passenger side of the vehicle together with t
The LDP system operates at vehicle speeds of approximately 37 MPH (60 km/h) and above when the lane markings are sufficiently clear for the camera to detect. If the Mitsubishi Outlander approaches either the left or right edge of the travel lane, the steering wheel will vibrate and LDP indicator (or
