To remove the air cleaner filter, release lock pins 1 and pull the air cleaner unit upward in direction 2.
The air filter is not designed to be cleaned and reused. Replace it when required.
Replace the air cleaner filter according to the maintenance schedule provided in the separate maintenance booklet. Whenever the filter is replaced, wipe the inside of the air cleaner housing and its cover with a clean, damp cloth to remove accumulated dust and debris.
WARNING
- Do not operate or drive the Mitsubishi Outlander with the air cleaner filter removed. In addition to filtering incoming air, the air cleaner helps contain flame if an engine backfire occurs. Without the filter installed, a backfire could expose anyone near the engine compartment to flame and cause burns. Exercise particular caution whenever working on the engine with the air cleaner removed.
- Never pour fuel into the throttle body or attempt to start the engine while the air cleaner is removed. Doing so creates a serious risk of fire, burns, or other personal injury.
READ NEXT:
Cleaning
If the windshield does not become clear after operating the windshield washer, or if the wiper blades chatter, skip, or leave streaks while moving, wax, dirt, road film, or other contaminati
If the braking system does not operate normally or braking performance appears reduced, have the Mitsubishi Outlander inspected as soon as possible. It is recommended that you visit an authorized Mits
Engine compartment
WARNING
Never install a fuse with an amperage rating higher or lower than the value specified on the fuse box cover. Using an incorrectly rated fuse can damage the electric
SEE MORE:
Refer to the Smartphone-link Display Audio [SDA] Owner's Manual for detailed instructions and information about the multimedia, connectivity, communication, and navigation functions available in the Mitsubishi Outlander.
Available functions and menu items may vary depending on the vehicle model,
The front airbags, knee airbags, seat-mounted side airbags, curtain airbags and seat belt pretensioners are designed for a single activation only.
After deployment, the SRS airbag warning light will normally remain illuminated unless the warning circuit itself has been damaged. Activated airbag a
