Mitsubishi Outlander: Drive mode indicator display screen
This displays the 4WD status.
If you select “4WD LOCK” mode with the drive mode selector, “4WD LOCK” is displayed; if you select “4WD AUTO” mode, “4WD” is displayed.
Nothing is displayed when 2WD mode is selected.
Refer to “Drive mode selector”.
mark display screen (when the ignition
switch or the operation mode is ON)
This is displayed when you press the multi- information meter switch and switch the warning display screen.
This mark is also displayed if there is another warning other than the one displayed.
When the cause of the warning display is eliminated, the
mark goes out automatically.
NOTE
• When the mark is displayed,
the warning display screen can be redisplayed on the information screen.
Refer to “Information screen (when the ignition switch or the operation mode is OFF)”.
Refer to “Information screen (when the ignition switch or the operation mode is ON)”.
READ NEXT:
Active Stability Control (ASC) OFF display screen*
This is displayed when the Active Stability Control (ASC) is turned off with
the ASC OFF switch.
If there is a fault with the ASC, the ASC OFF display is shown.
Refer to ““ASC OFF” switch
Information screen (when the ignition switch or the operation mode is ON)
Each time you lightly press the multi-information meter switch, the display screen
switches in the following order.
1- Odometer (Type1)/Tripmeter
2- Odometer (Type1)/Tripmeter
3- Service
Odometer/Tripmeter
The operation method is the same as when the ignition switch or the operation
mode is OFF.
Refer to “Odometer/Tripmeter” for further details.
SEE MORE:
Handling of compact discs
► Use only the type of compact discs that have the mark shown in the illustration
below.
(Playback of CD-R or CD-RW discs may cause problems.)
► The use of special shaped, damaged compact discs (like cracked discs) or low-quality
compact discs (like warped discs or burrs on the d
Changing the turn-signal sound
It is possible to change the turn-signal sound.
1. Press and hold the multi-information meter switch for about 2 seconds or more
to switch from the setting mode screen to the menu screen.
Refer to “Changing the function settings (when the ignition switch is “ON”)”.
2. Lightly press the
