Mitsubishi Outlander: Hazard warning flasher switch

Use the hazard warning flasher switch when the vehicle has to be parked on the
road for any emergency.
The hazard warning flashers can always be operated, regardless of the position
of the ignition key.
Push the switch to turn on the hazard warning flashers; push the switch again
to turn them off.
When this switch is operated, all turn-signal lamps flash continuously, as do
the turn-signal indication lamps in the instrument cluster.
CAUTION
If the lamps are kept flashing for a long time, the battery will be discharged,
resulting in hard engine starting or no start condition at all.
READ NEXT:
The rear window demister switch can be operated with the ignition switch in the
“ON” position.
Push the switch to turn on the rear window demister. To turn off the demister,
push the switch
The front fog lamp can be operated when the headlamps or tail lamps turn on.
Push the switch to turn on the front fog lamps, and push the switch again to turn
them off.
The indication lamp in t
The rear fog lamp can be operated when the headlamps or front fog lamps (if so
equipped) turn on.
Push the switch to turn on the gear fog lamp, and push the switch again to turn
it off. The ind
SEE MORE:
1: Vehicles with high power engine
2: Vehicles with low power engine
Note
► The values shown above apply to a vehicle on which optional equipment has not
been fitted.
► The results given do not express or imply any guarantee of the fuel consumption
of the particular vehicle.
► Select engine oil of the proper SAE viscosity number according to the atmospheric
temperature.
► Use engine oil conforming to the following classification: • ACEA classification:
“For service C1, C2, C3 or C4”
• JASO classification:
“For service DL-1”
If those clas
© 2010-2025 Copyright www.mioutlander.com
