Mitsubishi Outlander: Head restraints
Warning
► Driving without the head restraints in place can cause you and your passengers
serious injury or death in an accident. To reduce the risk of injury in an accident,
always make sure the head restraints are installed and properly positioned when
the seat is occupied.
► Never place a cushion or similar device on the seatback. This can adversely affect
head restraint performance by increasing the distance between your head and the
restraint.
READ NEXT:
To adjust height
Adjust the head restraint height so that the centre of the restraint is as close
as possible to eye level to reduce the chances of injury in the event of collision.
Any person too tall for the rest
To install
Confirm that the head restraint is facing the correct direction, and then insert
it into the seatback while pressing the height adjusting knob (A) in the direction
indicated by the arrow.
Caut
Making a luggage compartment
Warning
► When making a luggage compartment, never arrange the seats while the vehicle
is being driven or is on an incline. The seats could move unexpectedly or more than
required and caus
SEE MORE:
To play from a USB memory device
1. Press the PWR button (3) to turn on the audio system. The system turns on
in the last mode used.
2. Connect your USB memory device to the USB input terminal. Refer to “How to
connect a USB memory device”.
3. Press the CD button (2) several times to switch to the USB mode. The input
mo
To store the flat tyre or spare wheel
1. Lift up the luggage floor board.
2. To store the flat tyre or spare wheel, fit the installation clamp (A) by turning
it clockwise.
NOTE
• On vehicles with a T155/90D16 or T125/90D16 size spare wheel, the clamp cannot
be used for a normal size tyre.
3. Have your damaged tyre repaired
© 2010-2025 Copyright www.mioutlander.com
