Mitsubishi Outlander: To adjust height
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Seat and seat belts / Head restraints / To adjust height
Adjust the head restraint height so that the centre of the restraint is as close as possible to eye level to reduce the chances of injury in the event of collision.
Any person too tall for the restraint to reach their seated eye level, should adjust the restraint as high as possible.
To raise the head restraint, move it upward. To lower the restraint, move it downward while pushing the height adjusting knob (A) in the direction of the arrow. After adjustment, push the head restraint downward and make sure that it is locked.
READ NEXT:
To install
Confirm that the head restraint is facing the correct direction, and then insert
it into the seatback while pressing the height adjusting knob (A) in the direction
indicated by the arrow.
Caut
Making a luggage compartment
Warning
► When making a luggage compartment, never arrange the seats while the vehicle
is being driven or is on an incline. The seats could move unexpectedly or more than
required and caus
Seat belts
To protect you and your passengers in the event of an accident, it is most important
that the seat belts are worn correctly while driving.
The front seat belts have a pretensioner system.
These be
SEE MORE:
To operate using the keyless operation function
Locking the doors and tailgate
When you are carrying the keyless operation key, if you press the driver’s or
front passenger’s door lock/unlock switch (A), or the tailgate LOCK switch (B) within
the operating range, the doors and the tailgate are locked.
The turn-signal lamps will blink on
Ignition switch ON reminder system
When the engine was started using the keyless operation function
If the driver’s door is opened with the ignition switch in any position other
than “LOCK” (PUSH OFF) after turning off the engine, the ignition switch ON reminder
buzzer sounds intermittently to remind you to turn off the
© 2010-2025 Copyright www.mioutlander.com
