Mitsubishi Outlander: Making a luggage compartment
Warning
► When making a luggage compartment, never arrange the seats while the vehicle
is being driven or is on an incline. The seats could move unexpectedly or more than
required and cause a serious accident.
► If required, always operate the seating before the vehicle is in motion.
► Do not allow anyone to ride in the luggage compartment while the vehicle is in
motion. People who are not properly seated and restrained can be seriously injured
or killed in an accident.
► The luggage compartment in the rear of the vehicle should never be used as a play
area by children.
Children should be seated with seat belts fastened when the vehicle is in motion.
► Confirm that the seatback locks securely when it is returned.
Caution
► Do not stack luggage in the vehicle higher than the seatback height. Also,
firmly secure the luggage.
Serious accidents could result due to unrestrained objects entering the passenger
compartment during sudden braking.
► Make sure that the seat is operated by an adult. If it is operated by a child,
an unexpected accident might occur.
► Be careful not to catch your hands or feet when arranging the seat. Personal injury
could result.
Folding the rear seatbacks forward
The passenger and luggage compartments can be joined by folding the seatback forward. This is useful for carrying long objects.
The seatbacks can be folded with the rear seat release button or luggage compartment lever.
Note
► The seatbacks can be folded one side at a time.
1. Use the rear seat release button (A) or the luggage compartment levers (B).
2. The seatbacks fold forward.
Confirm that the seatback locks securely when it is returned.
Warning
► When folding the seatbacks forward from behind, an adult should perform
the operation, making sure there is no one in the rear seat. The seatback could
fall forward suddenly and trap the person between it and the seat cushion, causing
a serious injury.
It is difficult to see the rear seat from behind, so be especially careful of small
children.
► After returning the seatbacks to their upright positions, make sure that the seatbacks
lock in place and are firmly secured.
Also check to be sure that the rear seat belts are in front of the seatbacks, and
not caught behind the seatbacks.
Caution
► The exhaust pipe remains hot for a while after stopping the engine, so be sure not to touch it.
READ NEXT:
Seat belts
To protect you and your passengers in the event of an accident, it is most important
that the seat belts are worn correctly while driving.
The front seat belts have a pretensioner system.
These be
3-point type seat belt (with emergency locking mechanism)
This type of belt requires no length adjustment.
Once worn, the belt adjusts itself to the movement of the wearer, but in the
event of a sudden or strong shock, the belt automatically locks to hold
To fasten
1. Pull the seat belt out slowly while holding the latch plate.
Note
► When the seat belts cannot be pulled out in a locked condition, pull the belts
once forcefully and then return them. A
SEE MORE:
Driver’s and front passenger’s airbag system
The driver’s airbag is located under the padded cover in the middle of the steering
wheel. The front passenger’s airbag is contained in the instrument panel above the
glove box.
The driver’s airbag inflates at two different rates according to the severity
of the impact.
The front passe
To activate
1. With the ignition switch in the “ON” position, press the “ON OFF” switch (A)
to turn on the cruise control. The “CRUISE” indication lamp in the meter cluster
will come on.
Note
► If the cruise control is on when the ignition switch is turned to the “LOCK”
or “
