Mitsubishi Outlander: Headlamp levelling
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Instruments and controls / Headlamp levelling
READ NEXT:
Headlamp levelling switch
The angle of the headlamp beam varies depending on the load carried by the vehicle.
The headlamp levelling switch can be used to adjust the headlamp illumination
distance (when the lower beam is il
Automatic headlamp levelling
This mechanism automatically adjusts the direction of the headlamps (beam position)
depending on changes in the condition of the vehicle, such as the number of occupants
or luggage weight. When th
Turn-signal lever
1- Turn-signals
When making a normal turn, use position (1). The lever will return automatically
when cornering is completed.
2- Lane-change signals
When moving the lever to (2) slightly to cha
SEE MORE:
Changing the security alarm settings
It is possible to set the security alarm to the “active” mode or “inactive” mode.
Follow the procedure below.
1. Turn the ignition switch to the “LOCK” position.
If you started the engine with the key, remove the key from the ignition switch.
2. Place the lamp switch in the “OFF”
History of the Carisma
The first Carismas arrived in the UK, in five-door hatch form only, at the
end of 1995. These two initial models consisted of an 89bhp 1.6, offered in GL
and GLX trim, and a 114bhp 1.8 in GLX and GLS guise. Within a year this line-up
was replicated in saloon form. Then, in May 1997, they were
© 2010-2025 Copyright www.mioutlander.com
