Mitsubishi Outlander: Hinges and latches lubrication
Mitsubishi Carisma / Mitsubishi Carisma Owner's Manual / Maintenance / Hinges and latches lubrication
Check all latches and hinges, and lubricate if necessary by first cleaning and then applying multipurpose grease.
READ NEXT:
Wiper blades
If the blades are frozen to the window glass, do not operate the wipers until
the ice has melted and the blades are freed, otherwise the wiper motor may be damaged.
Wiper blade rubber replacement
Ventilation slots
The ventilation slots in front of the windscreen should be brushed clear after
a heavy snowfall so that the operation of the heating and ventilation systems will
not be impaired.
Weatherstripping
To prevent freezing of the weatherstripping on the doors, bonnet, etc., they
should be treated with silicone grease.
SEE MORE:
To resume the set speed
If the set speed driving is deactivated by the condition described in “To deactivate”, you can resume the previously set speed by pressing the “ACC RES”
switch (C) while driving at a speed of about 40 km/h (25 mph) or higher.
Under either of the following conditions, however, using the
Lancer + Outlander
The latest vehicle developed from MMC's "Project Global" mid-size platform,
Mitsubishi ASX aims at blending Lancer's passenger car on-road attitude with
Outlander's commanding driving position and convenience of its clever AWC
electronically-controlled 4-Wheel Drive system.
Sharing
© 2010-2025 Copyright www.mioutlander.com
