Mitsubishi Outlander: Wiper blades
If the blades are frozen to the window glass, do not operate the wipers until the ice has melted and the blades are freed, otherwise the wiper motor may be damaged.
Wiper blade rubber replacement
1. Lift the wiper arm off the window glass.
2. Pull the wiper blade until its
stopper (A) disengages from the hook (B). Then, pull the wiper blade further to
remove it.
NOTE
Do not allow the wiper arm to fall onto the window glass; it could damage the glass.
3. Attach retainers (C) to a new wiper blade.
4. Insert the wiper blade into
the arm, starting with the opposite end of the blade from the stopper. Make sure
the hook (B) is fitted correctly in the grooves in the blade.
NOTE
If retainers (C) are not supplied with the new wiper blade, use the retainers from the old blade.
5. Push the wiper blade until the hook (B) engages securely with the stopper (A).
READ NEXT:
Ventilation slots
The ventilation slots in front of the windscreen should be brushed clear after
a heavy snowfall so that the operation of the heating and ventilation systems will
not be impaired.
Weatherstripping
To prevent freezing of the weatherstripping on the doors, bonnet, etc., they
should be treated with silicone grease.
Additional equipment (For regions where snow is encountered)
It is a good idea to carry a shovel or a short-handled spade in the vehicle during
the winter so that you can clear away snow if you get stranded. A small hand-brush
for sweeping snow off the vehi
SEE MORE:
Warning for obstacles
If there is an obstacle behind the vehicle, a warning will be issued with the
information screen in the multi-information display and a warning buzzer.
1- Corner sensor (left)
2- Back sensor
3- Corner sensor (right)
Corner sensor
Back sensor (vehicles without a towing bar)
Back sensor
Steering wheel lock
To lock
Turn the steering wheel until it is locked.
To unlock
Turn the ignition switch to the “ACC” position while moving the steering wheel
slightly right and left.
Caution
► Carry the key with you when leaving the vehicle.
If your vehicle needs to be towed, turn the ignition s
