Mitsubishi Outlander manuals

Mitsubishi Outlander: How to fast forward/rewind the tape

Fast forward

Fast forward

Press the PROG button (4 or 5) that is in the same direction as shown by the display (8) to fast forward.

Fast rewind

Press the PROG button (4 or 5) that is in the opposite direction as shown by the display (8) to rewind.

Lightly press one of the unpressed buttons (4 or 5) to stop the tape during fast forward or rewind operation.

READ NEXT:

 Connection of a CD player or a CD autochanger

This radio may be connected to the MITSUBISHI Genuine CD player or CD autochanger. Consult an authorized MITSUBISHI dealer for more details. 1- PWR (On-off switch) 2- U/M/L button 3- CD (CD mode c

 UKW/MW/LW electronic tuning radio with CD player*

The audio system can be used when the ignition switch is in the “ON” or “ACC” position. A– Display window B– Audio system NOTE (1) The MITSUBISHI Genuine CD autochanger can be conne

 To listen to the radio

1- PWR (On-off) switch 2- VOL (Volume control) knob 3- U/M/L (UKW/MW/LW selection) button 4- Audio adjust button 5- AUDIO button 6- TUNE/SEEK (Down-step/Down-seek) button 7- TUNE/SEEK (Up-step/U

SEE MORE:

 Fuse load capacity

The fuse capacity and the name of the electrical systems protected by the fuses are indicated on the inside of the coin box located at the driver’s leg area and on the fuse box lid for fuses located in the engine compartment. Passenger compartment NOTE Spare fuses are contained in the fus

 Passenger’s switches

The passenger’s switches can be used to operate the corresponding passenger’s door windows. Press the switch down for operating the window, and pull up the switch for closing. Note ► Repeated operation with the engine stopped will run down the battery. Operate the electric windo

© 2010-2025 Copyright www.mioutlander.com