Mitsubishi Outlander: Instruments and controls
Mitsubishi Lancer / Mitsubishi Lancer Owner's Manual / Instruments and controls / Multi-information display / Instruments and controls
Note
► The fuel units, temperature units, display language, and other settings can
be changed.
Refer to “Changing the function settings (when the ignition switch is “ON”)”.
► The display screen is different depending on whether the ignition switch is “OFF”
or “ON”.
READ NEXT:
Multi-information meter switch
Each time the multi-information meter switch is operated, a sound is emitted
and the multi-information display changes between information such as warnings,
odometer, tripmeter, service reminder,
Mark display screen (when the ignition switch is “OFF”)
If you press the multi-information meter switch and return from the warning display
screen to the previous screen, the mark is displayed.
Refer to “To return to the screen displayed before the
Information screen (when the ignition switch is “OFF“)
Each time you lightly press the multi-information meter switch, the display screen
switches in the following order.
1- Odometer (Type 1)/Tripmeter
2- Odometer (Type 1)/Tripmeter
3- Service re
SEE MORE:
Tips for starting
► Do not operate the starter motor continuously longer than 10 seconds; doing
so could run down the battery. If the engine does not start, turn the ignition switch
back to “LOCK”, wait a few seconds, and then try again.
Trying repeatedly with the starter motor still turning will damag
Electric window control
The electric windows can only be operated with the ignition switch in the “ON”
position.
WARNING:
● Before operating the electric window control, make sure that nothing is capable
of being trapped (head, hand, finger, etc.).
● Never leave the vehicle without removing the key.
© 2010-2025 Copyright www.mioutlander.com
