Mitsubishi Outlander: Lower anchorage location
Your vehicle’s rear seat is fitted with lower anchorages for attaching a child restraint system with ISOFIX mountings.
READ NEXT:
Tether anchorage locations
There are 2 child restraint anchorage points located on the back of the seatbacks.
These are for fastening the child restraint tether straps to the 2 rear seat seating
positions.
Warning
`
Child restraint system with ISOFIX mountings
The child restraint system is designed only for seats that incorporate lower
anchorages. Retain the child restraint system using the lower anchorages.
It is not necessary to retain the child restra
To install
1. Remove any foreign material in or around the connectors and ensure the vehicle
seat belt is in its normal storage position.
2. Push the child restraint system’s connectors (A) into the slit (B
SEE MORE:
Speaker enrollment function
The Bluetooth® 2.0 interface can use the speaker enrollment function to create
a voice model for one person per language.
This makes it easier for the Bluetooth® 2.0 interface to recognise voice commands
said by you.
You can turn a voice model registered with the speaker enrollment function
Starting the engine (petrol-powered vehicles)
The starting procedure is as follows: 1. Fasten the seat belt.
2. Make sure the parking brake is applied.
3. Depress and hold the brake pedal.
4. Fully depress the clutch pedal. (M/T)
Note
► On vehicles with the Auto Stop & Go (AS&G) system, the starter will not operate
unless
© 2010-2025 Copyright www.mioutlander.com
