Mitsubishi Outlander manuals

Mitsubishi Outlander: To install

1. Remove any foreign material in or around the connectors and ensure the vehicle seat belt is in its normal storage position.
2. Push the child restraint system’s connectors (A) into the slit (B) in accordance with the instructions provided by the child restraint system’s manufacturer.

A- Connector

A- Connector
B- Slit
C- Vehicle seatback
D- Vehicle seat cushion
E- Lower anchorage

If your child restraint system requires the use of a tether strap, fasten the tether strap in accordance with steps 3 through 4.

3. Remove the head restraint from the location in which you wish to install a child restraint.
4. Latch the top tether strap hook (F) of the child restraint system to the tether anchorage bar (G) and tighten the top tether anchorage strap so it is securely fastened.

5. Push and pull the child restraint system in all directions to be sure it is

5. Push and pull the child restraint system in all directions to be sure it is firmly secured.

READ NEXT:

 To remove

Remove the child restraint in accordance with the instructions provided by the child restraint system’s manufacturer.

 Installing a child restraint system to a 3-point type seat belt (with emergency locking mechanism)

Installation: 1. Fasten the seat belt to secure the child restraint system. Make sure you hear a “click” when you insert the latch plate in the buckle. 2. Remove all slack by using the locki

 Seat belt inspection

► Check the belts for cuts, worn or frayed webbing and for cracked or deformed metallic parts. Replace the belt assembly if it is defective. ► A dirty belt should be cleaned with neutra

SEE MORE:

 To turn from “ACC” to “LOCK”

1. [Vehicles equipped with M/T] Push the emergency key in at the “ACC” position and keep it depressed until it is turned to the “LOCK” position, and remove it. [Vehicles equipped with CVT or Twin Clutch SST] First, set the selector lever (CVT) or the gearshift lever (Twin Clutch SST) to

 Sunshade

Slide the sunshade (5) manually to open and close it. NOTE The sunshade will operate together with the sunroof only when the sunroof is opened. CAUTION Do not attempt to close the sunshade when the sunroof is opened. WARNING (1) Do not put head, hands or anything else out of the sunroof op

© 2010-2025 Copyright www.mioutlander.com